|
Home > Fuel Cell Materials
Fuel Cell Materials
Fuel Cell & Hydrogen Generator Applications |
Considerable research is being done in the fuel cell market in order to provide alternative energy sources to be used as battery replacements or power sources. There are a number of different fuel cell applications that make material selection challenging. The items below offer corrosion resistance properties superior to that of standard 304 (18-8) stainless steel and may be well suited for fuel cell applications.
These sample pieces are being offered for trial purposes. They are shipped SAME DAY if ordered by 1:00PM Pacific Time via UPS Next Day Air. You may also find different sizes and quantities in our 316 / 316L section. For different sizes or larger quantities not available on Sidecuts.com® please contact Brown Metals Company directly. |
Alloy |
Temper |
Tensile Strength
Minimum (psi) |
Yield Strength
Minimum 0.2% offset (psi) |
% Elongation
in 2" Minimum |
316 / 316L
UNS S31600 / S31603
|
Annealed
|
70,000
|
25,000
|
40 %
|
E-Brite®, ASTM XM-27
UNS 44627 |
Annealed |
65,000 |
40,000 |
22% |
AL 29-4C®
UNS S44735 |
Annealed |
80,000 |
60,000 |
18% |
625 Nickel
UNS N06625 |
Annealed |
120,000 |
60,000 |
30% |
Alloy |
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
N |
Other (max) |
316/316L |
.03 |
2.00 |
.040 |
.030 |
1.00 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
.75 |
- |
- |
E-Brite® |
.010 |
.40 |
.020 |
.020 |
.40 |
27.5 |
.50 |
1.50 |
.20 |
.015 |
Cb=.20, Ni+Cu=.50, Fe=Bal |
AL 29-4C® |
.03 |
1.00 |
.040 |
.030 |
1.00 |
28.00-30.00 |
1.00 |
3.60-4.20 |
- |
.045 |
- |
625 Nickel |
.10 |
.50 |
.015 |
.015 |
.50 |
20.00-23.00 |
Balance |
8.00-10.00 |
- |
- |
Ti=.40, Al=.40,
Co=1.00, Fe=5.00,
Cb+Ta=3.15-4.15 |
E-Brite® is available in coil form. Type 316/316L can be purchased in COIL or SHEET form. The items below are for sample pieces that may be ordered for trial purposes.
|
|